Instructions for Using Pneumatic Rotary Joints

The pneumatic rotary joint system is a series of products specifically designed for pneumatic control.

Pneumatic rotary joint components include joints, filters, solenoid valves, cylinders, vacuum equipment, air pipes, etc.

Pneumatic rotary joints can be divided into multi-channel pneumatic rotary joints, single channel pneumatic rotary joints, high-speed pneumatic rotary joints, high-pressure pneumatic rotary joints, non-standard pneumatic rotary joints, etc.

Instructions for using pneumatic rotary joints:

1. Prohibit the use of products beyond the parameters and conditions specified in the manual;

2. Prohibit the use of pneumatic rotary joints in places with excessive vibration, impact rotation, and bending;

3. It is prohibited to disassemble or modify products, as there is a possibility of misoperation or leakage;

4. When repairing and regularly inspecting pneumatic rotary joints, please completely eliminate the fluid in the supporting system before proceeding;

5. Do not touch the pipe sleeve when there is pressure inside the pipe joint

6. Do not subject the pneumatic rotary joint to external loads (bending, twisting, pulling), otherwise it may be damaged or leaked;

7. When using water as a fluid, its operating pressure should not exceed 0-3kgf/cm2