Specific Connection of H-type Rotary Joint

The H-type rotary joint structure includes a housing, shaft, bearing, shaft clamp, hollow clamp, sealing ring, O-ring, stopper, copper stopper, spring, oil nozzle, etc.  Cooling systems used in industries such as papermaking, textiles, metallurgy, etc.

The connection methods of H-type rotary joints are divided into threaded and flange types.

1. Unidirectional flow rotary joint

Symbol: HD type rotary joint

Connection method: threaded connection

Symbol: HD-F type rotary joint

Connection method: Half ring flange connection

2. Two way circulation inner pipe fixed rotary joint

Symbol: HS-GF type rotary joint

Connection method: Half ring flange connection

3. Two way circulation inner pipe fixed rotary joint

Symbol: HS-G type rotary joint HS-X type rotary joint

Connection method: threaded connection

4. Bi directional flow inner tube rotary joint

Symbol: HS-XF type rotary joint

Connection method: Half ring flange connection

Quick disassembly and assembly of H-type rotary joint:

1. Dismantling sequence: Use calipers to remove the fixed bearing position of the rotary joint. Below is a conical graphite seal with a layer of hard film embedded like glass. After removing the graphite, the O-ring, flat pad, copper pad, and the bottom spring are taken out in sequence.

2. Installation sequence: Rotate the joint head downwards, place the spring at the bottom, control the spring, and then immediately place the copper pad, flat pad, O-ring, tapered graphite, and hollow bearing sleeve.

This article is organized by Tengzhou Xintian Machinery Technology Co., Ltd