Everyone is familiar with H-type rotary joints. The golden copper shell looks very beautiful. Not many people are familiar with the HK type rotary joint. After all, this is a rotary joint only used for large equipment. In fact, the difference between H-type rotary joints and HK is not only in th

Rotary joint is a commonly used connecting component in industrial equipment and mechanical devices, which can provide flexible rotation function in different directions. However, due to long-term use and potential loads, rotary joints are prone to wear, oil leakage, and other malfunctions. Regular

Installation knowledge of high-pressure rotary joints: 1. During the handling and storage of high-pressure rotary joints, collisions and drops should be avoided to prevent damage to the interface and internal components. 2. Install the machine as concentric as possible to ensure the good operation

The connection methods of rotary joints include threaded connections and semi split ring flange connections. The flange materials include: 20 #, A105, Q235A, 12Cr1MoV, 16MnR, 15CrMo, 18-8, 321, 304, 304L, 316, 316L, etc. Flanges can be divided into flat welding flanges, butt welding flanges, threade

Operating procedures for replacing metal hoses 1. The metal hose is made of chromium nickel austenitic stainless steel, and attention should be paid to preventing point corrosion by nitrogen ions and corrosive damage by dilute sulfuric acid during use. 2. Sealed piping systems should strictly comply

preface Rotating joint metal hose is a commonly used connecting component in many mechanical equipment, which can effectively connect the metal pipelines inside the equipment and achieve the transportation and transfer of media. As an important part of equipment connection, the safe operation and m

Rotary joints are classified according to different needs, uses, working principles, etc., and there are corresponding differences in their classification and working principles. The connection method of the circuit rotary joint can be selected according to the working situation. The entrance of t

1.What is a rotary joint A rotary joint is a connecting sealing device that inputs fluid mediumfrom a stationary pipelineinto rotating or reciprocating equipment, and then discharges it from the rotary joint, abbreviated as a "rotary joint". Composition of rotary joint: Single way rotary joint - it

When installing rotary joints, the following precautions should generally be noted: 1、 The device should be clean and bright. The parts of the rotary joint, related machinery and equipment components, utensils, lubricating oil, and wiping materials (cotton yarn, white cloth, silk, etc.) should be ve

introduction: Dual channel rotary joint is a commonly used connecting device in industrial equipment, which can achieve rotational transmission between two channels while maintaining the continuity and stability of the channels. This article will provide a detailed introduction to the principle and